LOOP/LOCKING CARABINER END CONFIGURATION

The Safety Retention Lanyard is a critical piece of operator gear. This super heavy duty lanyard was made especially for the special operations community but works well in other retention requirements. Positive, double locking forged aluminum carabiner will fit Little Bird retention tie down point. This carabiner is a special extra heavy duty type that is double locking for extra safety.

NO "BARTACKS" ARE USED IN THE SEWING OF THE LANYARD. WE ONLY USE PARACHUTE GRADE 3 CORD THREAD. THE LANYARD IS SEWN ON A COMPUTERIZED AUTOMATIC PATTERN CLASS 7 SEWING MACHINE TO ENSURE THE HIGHEST QUALITY AND STRENGTH.

We have all of our safety lanyards tested at an independent safety labratory to ensure proper strength and working capacity.

$48.27

Our CQB Cut-Away vest is a top of the line vest at a very affordable price. Fully MOLLE compatible, the vest uses military issue SPEARS plates and soft pads. One pull and the vest is released. Easily reassembled in less than one minute.

One great feature, NO CUMBERBUND! to mess with and cover up your mag pouches in the front. With no cumberbund you don't run into the weight of loaded mags stretching the cumberbund. With our proprietary adjusting system, the weight is partially distributed to your hips easing the amount of weight on the shoulders making for a very comfortable fit for long periods of wear. With this unique system, you can get the vest to fit tight as you want or as loose as you want.

ABU COLOR AVAILABLE FOR USAF ISSUE.

The vest is MOLLE compatible front and rear allowing the use of all military issue MOLLE pouches.

SUPERB FOR MILITARY ISSUE, PSD, PARA-MILITARY & SECURITY CONTRACTORS.

$566.88

A different style of bracket to allow the mounting of video devices or flashlights to all versions of the MICH/ACH combat helmet. No drilling of helmet is required. Just remove chin strap screws, install and you are good to go. Bracket comes complete with M-1913 Picatinney rails, hardware and installation instructions. Two brackets per pack. If you need to mount any type of device to your helmet, you know what this is.

*We are starting limited production again.*

M249 SAW soft pack holds 200 rounds of linked 5.56mm ammunition. These are military issue soft packs, no import or after market items. Pouch comes complete with plastic belt starter tab, loading instructions and ready to go.

*Additional colors of ACU, Black, Coyote are avavailable on special orders of 200 pcs or more.

See "details" for a new 200 rnd carrier set.

$69.55

LOOP/SHACKLE END CONFIGURATION

The Safety Lanyard is a critical piece of operator gear which requires 100% user confidence. Our lanyards are made of the highest quality materials and workmanship.

LOOP/SHACKLE END CONFIGURATION

The Safety Lanyard is a critical piece of operator gear which requires 100% user confidence. Our lanyards are made of the highest quality materials and workmanship.

The first production run for 2008 will consist of 75 ladders so we can deliver faster, please place your orders right away for quicker delivery. Over half are already committed.

CQB SCALING LADDER, TYPE 1.

A brand new product fresh from the battlefield. This CQB ladder system was developed from the input of operators/SF soldiers conducting CQB operations in Iraq and Afghanistan. The demand for a multi-purpose, lightweight ladder to scale compound walls for clearing operations as well as other functions was very high.

This super lightweight ladder can be carried by one operator, can be FAST roped in!!, can be carried on a Little Bird and used in a multitude of CQB roles. Ladder sections can also be joined together to form longer ladders. From scaling compound walls & first floor window enties to bus hits, this is the ideal CQB scaling ladder. Best of all, it can be used as emergency litter at any time.

With our patented design, the ladder can be collapsed from 15" wide to 3-1/2" wide without increasing the length of the ladder. Rubber pads cushion & silence ladder on conrete courtyards, floors, walls etc. Ladder can be marked with IR reflective identification of your choosing.

If the ladder is not used directly in tactical assaults, it can also be used by the "lo vis" teams as a work ladder during the on-target installation and/or retrieval of tracking, recording devices, beacons, audio or video instruments, etc inside or outside the target location. With the a-frame adapter, the ladder can be instantly converted into a folding/collapsing A-frame step ladder for a variety of uses inside the target house or walled compound.

Futuristic aircraft design style maximizes the use of lightening holes and other design features to ensure maximum strength with minimum weight. Specially designed aviation grade aluminum alloy extrusions provide the maximum strength to weight ratio after extensive CNC machining.

CQB ladders can be made in a variety of lengths and widths to better fit your mission requirements. Contact our sales office and we will be happy to custom manufacture specific length, width & color ladders for you.

TYPE I BASIC FEATURES

Example of patented design: Collapsed and carried by the operator either in a vehicle or on an aircraft, the ladder is 55" long x 3-1/2" deep x 3-1/4" wide and weighs only 11 lbs!. A special quick detachable sling allows the ladder to be easily carried and deployed instantly. Because of this small footprint, it can be carried by the operator while FAST roping into target area if needed.

When open for use, the Type I ladder is 55" long x 15" wide x 3-1/4" deep which is the ideal size for one operator to scale a compound wall and clear the courtyard with minimum of exposure. The Type I ladder collapses to 55" long x 3-1/2" wide x 3-1/4"

BUT, we can custom make any size & width you need easily and quickly!

If you conduct house clearing operations with a compound wall for security, you know exactly what the use of this ladder is. We intentionally did not post pictures of the ladder system.

Our high quality ladder system is built for professionals and used by professionals who require the absolute best equipment.

A complete MOLLE vest package ready to go consisting of vest, soft pads, hard plates, shoulder pads, groin protector, neck cape (not shown) and basic MOLLE pouch set. Everything you need in one package. The perfect vest for military & law enforcement use as well as for the security contractor & PSD operator.

Ballistic protection is NIJ Level IIIA. (Call/email if you need more technical information.)

11 piece MOLLE pouch set has all the basic pouches to get you started, even a PISTOL HOLSTER PANEL!

Standard pistol panel will fit M9 pistol and other weapons with approximate frame size and barrel length. Specify right hand or left hand holster at time of order.

The best feature of all is our special side adjustment system that allows the vest to be adjusted perfectly. The adjustment points are attached to the MOLLE straps and can be positioned exactly where you need them. Large 2" quick release buckles provide a fast and easy way to remove vest. The shoulder straps are fully adjustable as well. With these two adjustment points you can get your vest to fit exactly as you want!

Other vest features include:

COMPLETE SET, IN STOCK, READY TO SHIP!

YOU WILL NOT BE DISPPOINTED, VERY HIGH QUALITY!!

RELATED PRODUCTS:

P/N: 52935 Safety Lanyard.

P/N: 50111 Rappell Belt.

P/N: 52200 Single Point Sling.

P/N: 50864 Ballistic Helmet (MICH/ACH).

P/N: 50148 Team Leader Armband.

P/N: 50143 MOLLE Hip Panel Set.

P/N: 50123 Contractor Multicam Hat.

P/N: 52948 Vehicle Ammo/E&E Bag

SUPERB FOR PSD, PARA-MILITARY & SECURITY CONTRACTORS.

*Call for availability of military colors ACU and Foliage Green. These colors may be in stock.

$2,995.55

With two years of R&D, testing and operational wear, a vest is finally available that is complete and ready to wear. The vest is complete with all pockets, pouches and your choice of holster panel. Our tactical outer garmet is designed to be used with existing U.S. military issue SPEARS system. Soft trauma pads & hard plates from the SPEARS/BALCS system will fit the vest. Other plates & pads from other manufacturers will also fit as well.

We now offer body armor packages designed to fit our vest exactly. All hard plates & soft pads are made by Protective Products, Inc... the best name in the business. Assorted threat levels available for your convenience.

The main feature of our vest is the ability to quickly reconfigure and change the vest to suit the mission. If you need a quick & light vest for raids or vehicle patrols use the "Lo Vis" style of pockets. If you need a "basic load" vest with the maximum of ammo use the standard pouches. Changing the vest is simple and easy, just remove the desired panels and snap new panels in place. The vest system is designed with a variety of ammo pouches, pockets, holsters, radio pouches, etc to allow you to configure the vest to your needs. In addition, our vest is MOLLE compatible, which makes it the most versatile system available. All colors are stocked for your convenience.

OPTIONAL BODY ARMOR PACKAGES/ACC:

P/N: 50981 Plate & Pad package (NIJ Level IV)

P/N: 50864 Ballistic Helmet (MICH/ACH)

DESIGNED SPECIALLY FOR THE COMBAT INFANTRYMAN.

SUPERB FOR PSD, PARA-MILITARY & SECURITY CONTRACTORS.

COMING SOON ....#50874 CONTRACTOR/PSD KIT

This kit is based around the #50990 vest and will include eyewear, safety lanyard, backpack, bags, extra pouches,Safariland holsters, etc. Everything to start a basic kit .... at a discount!

$670.55

*NEW ITEM*

This carrier system was developed directly from the huge number of requests we received from Iraq asking for a faster way to access the soft pack during close quarter battle.

We designed what you, the end user, wanted and sent them downrange to be tested in combat. After filling the emergency orders, we are now going into production for stock orders. We expect these to sell out quickly.

The GUNNER's SET is a special combination carrier and 200 rnd soft pack for the M249 SAW. Allows soft pack to be carried and stored in the same carrier, no additional pouch is needed. With this new system, the soft pack is ready for instant access. Carrier is MOLLE compatible and protects soft pack from dirt. Adjustable quick release strap secures soft pack on carrier. Carrier also has D-rings to attach a shoulder strap allowing the set to be also carried as extra ammo with instant access.

This system allows almost instant access to soft pack. Just release the fastex buckle and remove, takes less than 5 seconds to have access to a fresh 200 round soft pack. Set comes complete with carrier, 200 rnd soft pack, starter tab and loading instructions.

Many of our customers recommend using the 51935 HMMWV MOLLE seat cover and attaching the GUNNER'S SET pouches to allow quick access to extra ammo.

DESIGNED SPECIALLY FOR THE COMBAT INFANTRYMAN.

RELATED PRODUCTS:

P/N: 52376 100 rnd Soft Pack.

P/N: 52354 200 rnd Soft Pack.

P/N: 51935 HMMWV MOLLE Seat Cover.

P/N: 50861 HMMWV Turret Ring Gun Mount.